Shop Today's Trending & Lightning Deals on Amazon.in
- Extended Warranty: Get a 36-month warranty, ensuring continued performance and peace of mind.
- High Performance: The 900VA/12V capacity provides reliable backup power for your essential appliances and electronics.
- Pure Sine Wave Output: Ensures the safety of sensitive electronics by offering clean and stable power during outages.
- LCD Display: The smart LCD display provides detailed information, including battery status and load levels.
- Easy Installation: Designed for user-friendly setup, making it simple to integrate into homes, offices, or shops.
| Manufacturer | |
|---|---|
| Country of Origin | |
| Item model number |
Related Products
Livfast Smart Flash Pure Sinewave 900VA/12V Inverter with Multi Function LCD Display, Power-Cut Predictor and Smart Mobile App Connectivity |Ideal…
Original price was: ₹14,200.00.₹6,499.00Current price is: ₹6,499.00.
Luminous Eco Volt Neo 1050 Pure Sine Wave 900VA/12V Inverter for Home, Office & Shops | Supports 1 Inverter Battery of 12V | Efficient & Reliable |…
Original price was: ₹8,990.00.₹5,799.00Current price is: ₹5,799.00.
Luminous Inverter & Battery Combo (Eco Watt Neo 700 Square Wave 600VA/12V Inverter with Red Charge RC 15000ST Short Tubular 120Ah Battery) for…
Original price was: ₹24,090.00.₹15,899.00Current price is: ₹15,899.00.
Placeholder –
Working Good
[...]Rakshith –
Connections were easy. Connected the battery with the right terminals, chose the correct battery type (Tubular in my Case) and chose the mode I wanted (UPS in my case and not eco since I wanted the UPS to cut off earlier with even slight voltage variation). Made sure that the MCB behind the UPS was on and also the switch was set to Normal. The UPS started functioning perfectly. I purchased the battery from a local vendor as he provided better prices (also for the return of my old battery).
The UPS takes about a minute to recognize the battery level. This happens only the first time you connect the battery. It will take some time to recognize the battery capacity every time you disconnect and reconnect the battery and in most cases, I guess people hardly do this once in 3 or 4 years to replace the battery.
The screen is informative. Shows a power icon when mains are connected. Shows Eco logo if it is set to eco mode and no logo in UPS mode. It shows the battery type when you change the type behind the UPS. When the UPS is on battery, the timer shows the approximate battery life in hours and minutes. If the battery is being charged, the UPS shows the time left for a full charge in hours and minutes. 2 downsides: If you have a high capacity battery and no load or low load (say just 2 or 3 LEDs) then the display shows the maximum 9 hours and 59 minutes since the display has no more space to show time beyond 9:59. The second downside is that the fan makes a significant amount of noise while the battery is charging and also generates quite a lot of heat. Avoid placing it in the living room or close to your bedroom.
The UPS does come with an option that gives you the battery distilled water level indicator. The downside is that most vendors do not have this in stock (Luminous E-Float Magnetic Water Level Sensor, as far as I remember).
The other issue I faced was the error codes. It was late at night and my light switch was not working. I decided to change it myself as I had a spare. I was working with the electricity on and accidentally did something to trip the breaker. My breaker tripped, I turned it back on. But the UPS was running on battery even when there was electricity available. The screen showed an error code like B01 if I remember. I did not have the manual handy and did not get any results when I googled the code. I then planned to remove the UPS and connect the mains directly, that’s when I found that the UPS breaker had tripped as well. A simple breaker reset solved the problem.
The last thing on my mind was the input wire size. I spent quite a lot for home wiring and have used wires with thickness of 4 sq. mm for lighting circuits as well. The wire that carries the load of all light, fans and electronic devices passes through a very thin wire provided by the manufacturer. I always have the concern that an overload may burn that wire even before the breaker trips. Maybe all manufacturers have this practice. The wires provided in 2000W water heater or an A/C unit are very thin as well and I am just a little paranoid.
[...]Banger –
Warranty slip is torn… little bit of noise no indication when power cut u have to see on panal. Over all good product
[...]Parashuram Kattimani –
Working fine since 4 years
[...]1 crucial miss is that it doesn’t beep or sound a short alarm or notify when the power goes off. This has resulted in multiple times when the power went off and I was without knowledge and drained the battery. Right before the battery is about to die will it sound a shrill alarm. By that time you realise that you should have switched off all non essential items but it’s too late by then.
Pavitra panda –
Stays silent
[...]Does the job well
Cons – when there is an outage and you turn on the pc for first time everything goes blank and the inverter displays old (overload) and restarts once don’t know why its happening
The display is barely visible in day or artificial lighting conditions
Parashuram Kattimani –
Good product
[...]Chinna Reddy –
Nice working
[...]ujwal –
Utterly disappointed with product manufacturing. Got defective product. Fan was not running and customer support is also not responsive. Had a utter disappointment with replacement queries. I would suggest everyone not to buy this product
[...]